3. SunNet Pro – Bluetooth Setup

Insert Bluetooth In USB Port AND Insert The CD Provided For Bluetooth. INSTALL Driver for Bluetooth. After installation RESTART Your Computer. Now Follow The15 steps noted in previous chapter. (USB serial cable connection)

Master and Slave Bluetooth Setup

4.1 Start “SunNet Pro” program.
4.2 Click “Board”-”Com Option”
4.3 Change the “Device Select Method”. From “Normal” to “BM2001-1:N”

Important: if your master and slave signs connected by a cable from one to the other you will use the “Normal” option

4.4 Press the “OK” button to complete the option change.